SpecificationsFull steel,lower plane is ST14 stretched plate,surface plane is SPCC hard steel painted with conductive antistatic epoxy resin.Structure1. Panel-Cementitious infill steel welded steel sheel, coner lock hole in four corner ,top tiles could be carpet ,PVC tiles or other tiles as you like

What else must be taken into account where a raised floor is installed and what requirements are sensible?The electrical resistance of individual areas is totally which means in practice: The resistance to earth R2 can never be lower than the highest resistance of the individual element in the seque

Please read instruction book carefully before use.1.Environmental requirements for applicable fields:Temperature:10~30℃（5~35℃ for OA raised floor ）Relative humidity:RH30%~70%Temperature change rate:△T≤15℃/hour ,without condensationVibration : no frequent vibration(resource)Chemical environment:

Stronger anti-bacteria:Biology resistance process during the production, and seaming welding avoid any bacteria growingIndentation resistance:Homogeneous structure makes the flooring resistant to indentation from heavy materialsHealth care:Without any heavy metals and poisonous substance, passing ce

STEP 1. Check the room dimensions and configuration against approved drawings. Using a builder's transit or laser, shoot in the areas to receive access floor to determine how much variation there is in the level of the subfloor within the room and at the termination points, such as elevator and door