Air Diffuser

Floor diffuser is a terminal device of the underfloor air conditioning system.
The access floor used by many buildings make our products be very clever arrangement in the building of the inner and outer regions. Our products are not only as the VAV system to provide the comfortable air conditioning systems, but also to provide maximum flexibility for users to adjust the indoor layout.
An architecturally appealing face design compliments any contemporary decoration and is available as standard in a black finish as well as a wide variety of custom colors.
Allowing extreme flexibility in space planning, the diffuser, once installed in the access floor panel, can be quickly relocated to accommodate changing conditions and floor layouts. 

Floor diffuser is a terminal device of the underfloor air conditioning system.
The access floor used by many buildings make our products be very clever arrangement in the building of the inner and outer regions. Our products are not only as the VAV system to provide the comfortable air conditioning systems, but also to provide maximum flexibility for users to adjust the indoor layout.
An architecturally appealing face design compliments any contemporary decoration and is available as standard in a black finish as well as a wide variety of custom colors.
Allowing extreme flexibility in space planning, the diffuser, once installed in the access floor panel, can be quickly relocated to accommodate changing conditions and floor layouts. 

1.UFD-M-A-B Floor "Swirl" Diffuser

Model UFD-M-A-B floor "swirr diffuser is designed for using in raised access floor air distribution systems, where the floor cavity is used as a pressurized supply air plenum. The core design produces a high velocity helical "swirl"discharge air pattern.The design achieves high induction rates of room air, which optimizes mixing for maximum comfort conditions.

UFD-M-A-B diffuser height 149mm, frame diameter 253mm.
The floor requires opening round diameter 213mm.

2.UFD-M-B-G Floor "Swirl" Diffuser

Model UFD-M-B-G floor "swirl"diffuser is designed for use in raised access floor air distribution systems. where the floor cavity is used as a pressurized supply air plenum. The core design produces a high velocity helical "swirl" discharge air pattern. Both of the outlet size and the air volume of this model are larger than those of Model UFD-M-A-B. The design achieves high induction rates of room air, which optimizes mixing for maximum comfort conditions.

UFD-M-B-G diffuser height 115mm, frame diameter 295mm. The floor requires opening round diameter 265mm.

3.UFD-E-B-G Floor "Swirl" Diffuser

Model UFD-E-B-G floor "swirl" diffusers with actuators are designed for using in raised access floor air distribution systems, where the floor cavity is used as a pressurized supply air plenum. An integral modulating actuator provides variable air volume control in cooling applications for precise zone temperature control. The core design produces a high velocity helical "swirl" discharge air pattern. The outlet size of this model is same as that of Model UFD-M-B-G, as well as the air volume. This design achieves high induction rates of room air, optimizes mixing for maximum comfort conditions.

UFD-E-B-G diffuser height 180mm, frame diameter 295mm.
The floor requires opening round diameter 265mm.

4.UFD-M-C-A Floor "Swirl" Diffuser

Model UFD-M-C-A steel floor diffuser is designed for using in raised access floor air distribution systems, where the foor cavity is used as a pressurized supply air plenum.The introduction of supply air through false floor systems is ideally carried out at locations in which convection currents are to be supported in occupied zones.Convection or lift currents can be caused by people, machines or electrical devices. Air flow from the floor to the ceiling is becoming increasingly popular in thermal loads are effectively discharged by means of this principle.
If the diffuser is equipped with the damper, the airflow direction can be adjusted (from vertical to horizontal or from horizontal to vertical). The airflow direction has been adjusted in advance according to the order requirement when the product is in the factory. The direction can be changed by roating the damper on scene.
Floor diffusers are installed at locations which are not continuously occupied. They can be deployed at distances of as little as 40cm from seating. The noise is small. When you need to adjust the indoor layout, simply move the floor equipped with the diffuser,without a lot of work or expense.