Calcium Sulphate Access Floor System
Description
Calcium Sulphate Access Floor System
The Calcium Sulphate Access Floor
ATFLOR Calcium Sulphate Access Floor panels consist of environment friendly calcium sulphate board glue to and galvanized steel sheet on bottom. These panels have a class A flame spread rating and provide excellent rigidity, durability, and acoustic performance. Calcium Sulphate Access Floor panels are engineered to meet Tate Standards per CE& CISCA testing methods.
Key Performance Characteristics
· Panel weight : 18 kg/pc, bare.
· panel- calcium sulphate board ,PVC/ABS corvered four edges,steel on the bottom plate.
· Accessories -die casting steel structure pedestal plastic gasket on top ,height could be 70mm ---1500mm , with or without square tube stringer steady connect the system
· ULC File Number: R16784.
System Performance
ATFLOR Standards to CE& CISCA Testing Methods
Technical Data
International | Concentrated Load | Impact Load (N) | Ultimate Load (N) | Uniform Load (N/M2) | Rolling Load(N) | |||
LB | N | KG | 10 Times | 10000 Times | ||||
FS800 | ≥800 | ≥3350 | ≥363 | ≥536 | ≥11250 | ≥16100 | 3560 | 2670 |
FS1000 | ≥1000 | ≥4550 | ≥450 | ≥670 | ≥13350 | ≥23000 | 4450 | 3560 |
FS1250 | ≥1250 | ≥5560 | ≥567 | ≥780 | ≥16680 | ≥33000 | 5560 | 4450 |
FS1500 | ≥1500 | ≥6675 | ≥670 | ≥1005 | ≥19892 | ≥34500 | 6675 | 5340 |
*All tests are performed using CE& CISCA's Recommended Test Procedures for Access Floors
Laminates for Data Centers
Laminates for Data Centers
High pressure laminates (HPL) and Vinyl are the mostly adopted finishes on an access floor in data centers.
Key Performance Characteristics
· Superior wear resistance will not detach, chip or crack
· Simple maintenance with mop cleaning
· Visually appealing with a wide range of color options
ATFLOR offers a variety of laminates for use inside of data centers. High pressure laminates (HPL) and static control vinyl laminates are factory laminated to the access floor systems, reducing installation time and cost. HPL in data centers is the most common finish found on an access floor and complies with requirements for low static generation and retention and assures ease of maintenance.
Static control vinyl is specifically designed to control static discharge. Which helps protect your most sensitive equipment and critical applications by keeping static away.
Laminate Finishes Proposal
Product | Manufacturer | Details | Style |
HPL | Maite | Laminated Floor Tile | Standard Dissipative HPL |
HPL | Meiah | Laminated Floor Tile | High Pressure Laminate |
Static Control Vinyl | HJ | Conductive&Static Dissipative | Conductive or Dissipative Vinyl |
Static Control Vinyl | ATFLOR | Static Dissipative | Homogeneous PVC Tile |
Understructure Options
The Heavy Duty Bolted Stringer Understructure System
ATFLOR Heavy Duty Bolted Stringer Understructure System is designed for computer rooms, data centers, industrial applications and heavy rolling load areas.
Key Performance Characteristics
· Designed for computer rooms, data centers, industrial applications, and heavy rolling load areas
· Allowing floors to be installed over 1500mm high
· Gravity-held in understructure for fast removal and replacement
· Stringers providing lateral resistance to heavy rolling loads
· Available seismic resistant pedestal to limit or eliminate the requirement for special bracing