RUBBER FLOORING CLEANING AND MAINTENANCE

INITIAL CLEANING

• Remove all loose debris and dust and any residual sand with broom or vacuum.

• Clean the floor covering with a PH neutral detergent using a mop or a combined wash/vacuum machine in larger areas.

• In case of heavy dirt, clean the flooring using a low speed monobrush equipped with light abrasive disc (red disc in the 3M scale) and PH neutral detergent. Wet vacuum, rinse several times and leave to dry.

 

DAILY MAINTENANCE

• Remove dust, dirt and stains from the floor.

• Clean with a broom and damp cloth or mop, a micro-fibre mop or vacuum may also be used. If detergent is required always use a PH neutral product. A combined machine with PH neutral detergents is suggested in larger areas.

 

PERIODIC MAINTENANCE

• When standard maintenance operations are not sufficient to remove dirt, a deeper cleaning is recommended in order to restore the initial appearance of the flooring.

 

• In case of heavy dirt, clean the flooring using a low speed monobrush equipped with light abrasive disc (red disc in the 3M scale) and PH neutral detergent. Wet vacuum, rinse several times and leave to dry.

 

• If necessary, restore the desired level of gloss using a spray-buffing system. The speed of the machine and the type of detergent/floor maintainer is to be selected depending on the level of dirt and on the desired level of gloss. Contact us for more details.