The Notes in Using Raised Floor

Please read instruction book carefully before use.

1.Environmental requirements for applicable fields:

Temperature:10~30℃（5~35℃ for OA raised floor ）

Relative humidity:RH30%~70%

Temperature change rate:△T≤15℃/hour ,without condensation

Vibration : no frequent vibration(resource)

Chemical environment: No high corrosion volatiles substance

2.Water wash is prohibited for cleaning the surface of raised floor .Dry mop shall be used to clean it to prevent surface of raised floor from being desquamated and metal parts under it from being rusted and corroded.

3.It is forbidden to use hard or sharp things to extrude ,impact or scratch the cover of floor and plastic- sprayed layer.

4.Special panel lifter shall be used for opening or installing raised floor gently. 

Donˊt use iron tools to pry up it rudely.

5.Sound may be heard when walking on the floor after it is laid. This is caused by ground condition and installation problems, not by performance and quality of the floor itself.

6. Donˊt use excessive heavy things ,which can damage the floor.

7.Donˊt move the floor while it is lifting ,which may make it fall off.

8.Gloves must be worn when taking the floor. Otherwise hands are easily hurt by it.

9.Avoid sunlight shining directly so as to prevent cover layer from changing color and aging earlier.

10.Please donˊt lay down gas pipes and water pipes and water pipes under the floor.

11.In the busy area such as corridor , gateway etc., excessive load should be avoided .Otherwise, the floor will be easily damaged.