Trunking Bare steel raised access floor

Publish Time: 2018-06-29     Origin: Site

Specifications

Full steel,lower plane is ST14 stretched plate,surface plane is SPCC hard steel painted with conductive antistatic epoxy resin.


Structure

1. Panel-Cementitious infill steel welded steel sheel, coner lock hole in four corner ,top tiles could be carpet ,PVC tiles or other tiles as you like

2. Pedestal-Single steel strew for super low height be 35mm ---150mm


Description 

1. Environment friendly and energy saving

2. Meet the the excellent height 35mm ,with the intelligentized cabling and wiring system ,good for the modern office  cabling and wiring plan

3. Main components: panel, trunk cover plate ,corner cover plate ,corner bottom plate

4. Optional accessories :Electrical outlet,bottom trunk ,outlet

5. Easy for the wiring and cabling ,wires and cables put into the trunk and without cut the panel.

6. The adjustment of the floor 35mm---150mm ,the best height is 50mm ,save the space of the room.


Application

5A class office building, computer room and occasions which require overhead and large wires, Even eligible for remaking surface for the wires in old office building.

Trunking Bare steel raised access floor

WHY MAINTAIN RAISED FLOOR?

Concentrated Load

Steps to Minimize Contamination

Raised Access Floor in All Aluminum