A raised access floor is used to provide a means of creating a void below floor level which is capable of ensuring building services are available at their required destination.

The panel shall be pre-loaded to the test load. A pre-load of 50 lbs/ft² (i.e. 200 lb In the case of a panel that is 4 ft² - 2' x 2') shall then be applied and the instrumentation measuring deflection and load shall be set at zero. (Reference zero = 50 lbs/ft² pre-load)

F" edge trim is inserted between the steel panel and the surface finish. The inserted "F" edge trim is very firm and stable. Panel with "F" edge trim creates perfect installation effect with tiny seam, which can be applied to high computer room and place where requirement on antistatic or many wires.

Basic installation for ATFLOR’s Honed Concrete Panel is as outlined in ATFLOR’s Installation Manual. All access floors are all basically installed the same and all procedures should be followed.

Welbonse rubber with high wear-resisting, high elasticity and high bearing capacity, makes the ideal material to manufacture the high-quality floor. In the past ten years, we have accumulated rich experience by engaging the introduction manufacturing and application of rubber floor.

Generally, the stringers, pedestals and some auxiliary accessories are used for the installation of anti-static raised access floors. During the installation, the usage is totally different.

Contains no ferrous materials to disrupt magnetic fields; Perforated panels and grates provide optimum laminar air flow.

This is a horizontal component that connects pedestals together. It connects to the pedestal head and is used to provide additional lateral support at greater floor height and/or increase the structural performance of the raised floor system.

With the promotion of customers’ life level, the quality and the service of the antistatic floorings have become more and more important.

For long-term high performance of the raised floor, regular maintenance (once in 2 or 3 years) is needed. Please contact us for details.