Zero the dial gauge C.3 to the reference line passing through B2 and B3.The panel is placed upside down into contact with the transverse stops B1, B2 and B3.The deviations on the four sides of the panel are successively measured.

Floor tiles (ceramic or porcelain) are a great investment in your home. They're attractive, virtually never wear out and they're easily cared for. As an extra bonus, you can install them yourself.

Choose wood core type raised access floor if better foot feel is preferred. Unlike China laminate flooring, the surface of wood core is not strong abrasion resistant. So the surface should be covered with antistatic HPL or PVC tile which is strong wearing resistant.

It adopts the technology of toughing treatment, which strengthens load capacity and static performance. Situation under the floor can be easily inspected without moving the panel, which saves labor and time as well.

If you have an area with a great deal of technology, then access flooring can be one of the best options to help you minimize clutter. This is a great option as it provides a place to hide all of the wires and cables associated with your computers or data center.

These series have solved the air-conditioning optimization and the energy saving issues in computer rooms immediately after it was put into markets.

Calcium sulphate raised flooring panel (CaSO4)are widely used raise floor panel due to its rich features. Panel is made up of calcium sulphate which is inherently has high mechanical character.

Zero the dial gauge C2 to the exact perpendicular established by the transverse stops B.1 and the reference line through B2 and B3.Place the panel upside down into contact with the transverse stops B1, B2 and B3. The four sides of the panel are successively measured.

FH-UFC series ground type fan coil is a kind of terminal unit specially designed for air and water treatment in raised floor system. It has advantages as compact structure, short finish height, low noise, superior performance, and most importantly, it is convenient to install and maintain.

The first drop shall make contact with the centre of the panel. A second drop shall be made on the centre of one edge of the panel so that the complete bag bottom meets the panel surface. The panel shall not collapse or crack.