Diamond back design ,elegant appearance ,many times reshape, high dimensional precision.

ATFLOR calcium sulphate access flooring system is manufacturered from 1600kg fibre reinforced calcium sulphate which forms the core of the panel. Non-combustible high quality alpha-hemihydrate single pressed gypsum and non-toxic unbleached cellulose fibers are used as reinforcing material.

The anti - static engineering of computer home is part of the security and security of computer system place. As a consequence of many causes, the static electric power created through the most repeated, the most tricky to eradicate certainly one of the hazards.

ATFLOR wood core access floor consists of engineered 600mm square modular panels constructed around a high density E1 grade chipboard core. The core is fully encapsulated with GI on all six sides in a special mechanical interlocking of the top & bottom GI tray.

High Pressure Laminate is the top surface selected for use on raised access floors. It is commonly referred to as HPL. HPL is available in a wide variety of colors.

Instead of fastening by adhesive or mechanical fixing an appropriate clamping device may be used providing its adequacy is proven by comparative tests and checked at regular intervals The same applies to the use of the same pedestal bases for more than one test.

Data Center servers generate high heat output and hence keeping them cool and operating it efficiently is very important. Data centers that are not well managed often suffer from hotspots leading to equipment failure.

Clean your sub floor so that it is free of all dust, dirt, grease or other foreign material. Also when gluing your flooring down, it is recommended that the sub floor is free of any moisture.

Rubber flooring is flooring which is made from rubber. There are a number of different formats for this type of flooring, ranging from rubber tiles which are designed to be installed as a permanent flooring solution to rubber pads which can be overlaid onto existing flooring.

A raised floor is an elevated structural floor which is placed above a concrete slab leaving an open space between the two structures. The open space acts as a hidden passage or an empty space for the placement of mechanical and electrical equipment.