  + 86 519 80585808                     hw@xlholdinggroup.com    

How to Refinish Aluminum Oxide Flooring

Views:0     Author:Site Editor     Publish Time: 2017-06-29      Origin:Site

Rub the edge of a quarter against the top of the floor, looking for any signs of residue on the floors. Dip a soft cloth into mineral oil and wipe it against the floor as another test for residue. You must completely strip the wood, sand down the top and apply stain if a large amount of residue appears on the floor.

Sweep the floors with a broom, capturing any dust, hair or other debris in a dustpan. Run the broom behind any appliances or counters, in the corners and along any crevices in the room where debris might hide. Clean the flooring of as much debris as possible.

Coat the floors with a thin layer of aluminum oxide cleaner. Buff the floors gently with a floor buffer that moves at 175 RPM. Depending on the type of cleaner used, it may come with preparation pads that you use with the floor buffer.

Pour a small amount of aluminum oxide floor cleaner in a bucket. Soak a terrycloth mop in the cleaner and wring out the mop head, removing as much of the cleaner as possible. Rub the mop over the access flooring then buff it with the floor buffer.

Wait for the floor cleaner to dry. Reapply the cleaner to the mop, wring out the excess and wipe down the floors again. Buff the floors with the floor buffer. Follow up with a protective spray, if there is one, supplied with the cleaner.

more information please click here.


Search

Contact Us

Address: No.255 South Tongjiang Road,  Changzhou,  Jiangsu,  China 213002 

Tel:+ 86 519 80585808 
Fax:+86 519 80585805
E-mail:hw@xlholdinggroup.com

ATFLOR: Your first time choice, our life time service.

  +86 519 80585808     

Copyright © 2016 XL Holding Group All Rights Reserved.