Raised Floor With “F” Edge Trim

F" edge trim is inserted between the steel panel and the surface finish. The inserted "F" edge trim is very firm and stable. Panel with "F" edge trim creates perfect installation effect with tiny seam, which can be applied to high computer room and place where requirement on antistatic or many wires.

This patent floor, owe to wider edge with rib, "#"back strengthening rib and salient point structure, more loading than national standards. It is the world's leading technology of side loading for steel raised access floor and has been applied for the protection of national intellectual property.

Concentrated load

XL Holding Group patent design, owe to wider edge with rib, "#"back strengthening rib and salient point structure, improve 10-20% loading ability of each floor.

Edge load

The edge load is the key data which can inspect the quality of the raised floor. XL second wide-edge steel raised floor with "#"back strengthening rib and salient point structure, has conquered the technical difficulties, make the edge load higher than the center load to solve the edge warping caused by uneven load effectively.

Glue and trim

XL Holding Group adopt the gule from Sino-foreign joint venture. When the trim is glued then adds 502 glue, it is hard to drop.

Appearance and size

Steel raised floor of XL Holding Group has the patent design wide-edge steel raised floor with "#"back strengthening rib and salient point structure, reshaping many times and high flatness which is less than 0.4mm and be superior to similar factories 10-20%. 

Floor welding art

XL Holding Group adopt high-end digital-controlled multipoint welding machine, so it welds evenly and the structure of top and bottom steel will be strong.